Spray Frame Questa pagina è disponibile soltanto in inglese. La traduzione
italiana comparirà presto.
Se desiderate ottenere una licenza gratuita
per la traduzione, prego di scrivere noi.
The Spray Frame represets paint spray at the image borders. The width, the color and the spray density can be set in the Settings panel.
The Settings panel offers the following parameters for this picture frame.
Frame Color. The parameter sets the color of the frame. Select a color by double-clicking the color plate and choosing a color from the Standard Color Selection Dialog.
|
| Yellow color is set |
Transparent. When the check-box Transparent is enabled, the image under the frame gets transparent. One may need it on an image with several layers; in this way, the image on the lower layer(s) is visible and serves as a frame.
|
| Check-box Transparent enabled |
Frame Width. The parameter sets the width of the frame. The values of the parameter vary from 0 to 100%. At 0% there is no frame, at 100% the width of the frame makes a quarter of the minimum image size (as to its width or height). For example, for an image 600 x 800 pixels the 100% width of the frame is calculated as follows: 1/4 from the minimum size (600 px) is 150 pixels.
|
|
| Frame Width = 30% |
Frame Width = 100% |
Density. The parameter sets the spraying density. The values of the parameter vary from 0 to 200. The higher the value of the parameter, the denser is the spraying. The spraying starts on the borders, therefore the density on the outer border is higher than on the inner one.
|
|
| Density = 40 |
Density = 120 |
Random Seed. It is the starting number for the random number generator that defines the distribution of particles at the inner border of the frame. It can be any number between 0 and 9999. Every number correponds to a particular particles distribution (provided all other parameters stay the same).
| 
